Skip to main content

Articles

Page 1 of 5

  1. Insufficient bone volume around an implant is a common obstacle when dental implant treatment is considered. Limited vertical or horizontal bone dimensions may lead to exposed implant threads following placeme...

    Authors: Minh Khai Le Thieu, Amin Homayouni, Lena Ringsby Hæren, Hanna Tiainen, Anders Verket, Jan Eirik Ellingsen, Hans Jacob Rønold, Johan Caspar Wohlfahrt, Antonio Gonzalez Cantalapiedra, Fernando Maria Guzon Muñoz, Maria Permuy Mendaña, Ståle Petter Lyngstadaas and Håvard Jostein Haugen

    Citation: Biomaterials Research 2021 25:43

    Content type: Research article

    Published on:

  2. This review examines the preparation of alginate hydrogel microparticles by using droplet-based microfluidics, a technique widely employed for its ease of use and excellent control of physicochemical propertie...

    Authors: Cheng Zhang, Romain Grossier, Nadine Candoni and Stéphane Veesler

    Citation: Biomaterials Research 2021 25:41

    Content type: Review

    Published on:

  3. Intrauterine adhesion (IUA) is a common gynaecological disease that develops from infection or trauma. IUA disease may seriously affect the physical and mental health of women of childbearing age, which may le...

    Authors: Junyan Ma, Hong Zhan, Wen Li, Liqi Zhang, Feng Yun, Ruijin Wu, Jun Lin and Yangyang Li

    Citation: Biomaterials Research 2021 25:40

    Content type: Review

    Published on:

  4. The addition of bioactive glass (BG), a highly bioactive material with remineralization potential, might improve the drawback of weakening property of mineral trioxide aggregates (MTA) when it encounters with ...

    Authors: Jei Kim, Hyun-Jung Kim, Seok Woo Chang, Soram Oh, Sun-Young Kim, Kyoung-Kyu Choi, Duck-Su Kim and Ji-Hyun Jang

    Citation: Biomaterials Research 2021 25:39

    Content type: Research article

    Published on:

  5. Nowadays, the engineering vascular grafts with a diameter less than 6 mm by means of electrospinning, is an attracted alternative technique to create different three-dimensional microenvironments with appropri...

    Authors: Yuliet Montoya, José Cardenas, John Bustamante and Raúl Valencia

    Citation: Biomaterials Research 2021 25:38

    Content type: Research article

    Published on:

  6. Superparamagnetic iron oxide (SPIO) nanoparticles have been widely used in several biomedical engineering in vivo. Although various surface modifications have been made to these non-biodegradable nanoparticles...

    Authors: Yong Hwa Hwang, Youn-Jung Kim and Dong Yun Lee

    Citation: Biomaterials Research 2021 25:36

    Content type: Research article

    Published on:

  7. Critical bone defects remain challenges for clinicians, which cannot heal spontaneously and require medical intervention. Following the development of three-dimensional (3D) printing technology is widely used ...

    Authors: Misun Cha, Yuan-Zhe Jin, Jin Wook Park, Kyung Mee Lee, Shi Huan Han, Byung Sun Choi and Jae Hyup Lee

    Citation: Biomaterials Research 2021 25:35

    Content type: Research article

    Published on:

  8. Bone substrates like hydroxyapatite and tricalcium phosphate have been widely used for promoting spinal fusion and reducing the complications caused by autograft. Whitlockite has been reported to promote bette...

    Authors: Yuan-Zhe Jin, Guang-Bin Zheng, Minjoon Cho and Jae Hyup Lee

    Citation: Biomaterials Research 2021 25:34

    Content type: Research article

    Published on:

  9. In addition to the widespread use of antibiotics in healthcare settings, the current COVID-19 pandemic has escalated the emergence of antibiotic resistance. Nosocomial infections among hospitalized patients is...

    Authors: Arunmozhiarasi Armugam, Siew Ping Teong, Diane S. W. Lim, Shook Pui Chan, Guangshun Yi, Dionis S. Yew, Cyrus W. Beh and Yugen Zhang

    Citation: Biomaterials Research 2021 25:33

    Content type: Research article

    Published on:

  10. Gastroretentive drug delivery system (GDDS) are novel systems that have been recently developed for treating stomach diseases. The key function of all GDDS systems is to control the retention time in the stoma...

    Authors: Yu-Tung Hsu, Chen-Yu Kao, Ming-Hua Ho and Shiao-Pieng Lee

    Citation: Biomaterials Research 2021 25:31

    Content type: Research article

    Published on:

  11. Various surface modification techniques that can further improve the function and usability of stainless steel as a medical device have been reported. In the present study, the physical and biological properti...

    Authors: Inho Bae, Kyung-Seob Lim, Jun-Kyu Park, Ju Han Song, Sin-Hye Oh, Jung-Woo Kim, Zijiao Zhang, Chan Park and Jeong-Tae Koh

    Citation: Biomaterials Research 2021 25:30

    Content type: Research article

    Published on:

  12. Bone is a complex structure with unique cellular and molecular process in its formation. Bone tissue regeneration is a well-organized and routine process at the cellular and molecular level in humans through t...

    Authors: Iruthayapandi Selestin Raja, Desingh Raj Preeth, Mohan Vedhanayagam, Suong-Hyu Hyon, Dohyung Lim, Bongju Kim, Subramaniyam Rajalakshmi and Dong-Wook Han

    Citation: Biomaterials Research 2021 25:29

    Content type: Review

    Published on:

  13. Alendronate (Alen) is promising material used for bone-targeted drug delivery due to its high bone affinity and therapeutic effects on bone diseases. In addition, Alen can enhance the osteogenic differentiatio...

    Authors: Guk Young Ahn, Sung-Eun Kim, Tae Hoon Yun, Inseong Choi, Daewon Park and Sung-Wook Choi

    Citation: Biomaterials Research 2021 25:28

    Content type: Research article

    Published on:

  14. Due to the shortage of organs’ donors that limits biological heart transplantations, mechanical circulatory supports can be implanted in case of refractory end-stage heart failure to replace partially (Ventric...

    Authors: Martina Todesco, Carlo Zardin, Laura Iop, Tiziana Palmosi, Pietro Capaldo, Filippo Romanato, Gino Gerosa and Andrea Bagno

    Citation: Biomaterials Research 2021 25:26

    Content type: Research article

    Published on:

  15. Autograft has been widely used in various orthopedic and dental surgery for its superior osteogenicity, osteoinductivity and osteoconductivity. But the available volume of the autograft is limited and the effi...

    Authors: Yuan-Zhe Jin, Guang-Bin Zheng, Jae Hyup Lee and Shi-Huan Han

    Citation: Biomaterials Research 2021 25:25

    Content type: Research article

    Published on:

  16. Various non-invasive administrations have recently emerged as an alternative to conventional needle injections. A transdermal drug delivery system (TDDS) represents the most attractive method among these becau...

    Authors: Woo Yeup Jeong, Mina Kwon, Hye Eun Choi and Ki Su Kim

    Citation: Biomaterials Research 2021 25:24

    Content type: Review

    Published on:

  17. Current research on skin tissue engineering has been focusing on novel therapies for the effective management of chronic wounds. A critical aspect is to develop matrices that promote growth and uniform distrib...

    Authors: Athanasios S. Arampatzis, Konstantinos N. Kontogiannopoulos, Konstantinos Theodoridis, Eleni Aggelidou, Angélique Rat, Anne Willems, Ioannis Tsivintzelis, Vassilios P. Papageorgiou, Aristeidis Kritis and Andreana N. Assimopoulou

    Citation: Biomaterials Research 2021 25:23

    Content type: Research article

    Published on:

  18. Exosomes are nano-sized cargos with a lipid bilayer structure carrying diverse biomolecules including lipids, proteins, and nucleic acids. These small vesicles are secreted by most types of cells to communicat...

    Authors: Gi Hoon Yang, Yoon Bum Lee, Donggu Kang, Eunjeong Choi, Yoonju Nam, Kyoung Ho Lee, Hi-Jin You, Hyo Jin Kang, Sang Hyun An and Hojun Jeon

    Citation: Biomaterials Research 2021 25:22

    Content type: Review

    Published on:

  19. The co-transformation of solid waste of natural and anthropogenic origin can be carried out through solid-state-fermentation systems to obtain bio-products with higher added value and lower environmental impact.

    Authors: Alejandra Castillo-Toro, Juan F. Mateus-Maldonado, Diana N. Céspedes-Bernal, Leonardo Peña-Carranza, Adriana I. Páez-Morales, Raúl A. Poutou-Piñales, Juan C. Salcedo-Reyes, Lucía A. Díaz-Ariza, Laura C. Castillo-Carvajal, Aura M. Pedroza-Rodríguez and Luis D. Gómez-Méndez

    Citation: Biomaterials Research 2021 25:21

    Content type: Research article

    Published on:

  20. A novel biodegradable scaffold including gelatin (G), chitooligosaccharide (COS), and demineralized bone matrix (DBM) could play a significant part in bone tissue engineering. The present study aimed to invest...

    Authors: Thakoon Thitiset, Siriporn Damrongsakkul, Supansa Yodmuang, Wilairat Leeanansaksiri, Jirun Apinun and Sittisak Honsawek

    Citation: Biomaterials Research 2021 25:19

    Content type: Research article

    Published on:

  21. Maximizing osteointegration potential of three-dimensionally-printed porous titanium (3DPPT) is an ongoing focus in biomaterial research. Many strategies are proposed and tested but there is no weighted compar...

    Authors: Simon Cleemput, Stijn E. F. Huys, Robbert Cleymaet, Wilfried Cools and Maurice Y. Mommaerts

    Citation: Biomaterials Research 2021 25:18

    Content type: Review

    Published on:

  22. Herein, we first time used the gum Moringa oleifera as reducing and capping agent for successful synthesis of silver nitrate and zinc oxide nanoparticles(NPs) through green synthesis approach. This study was aime...

    Authors: Muhammad Irfan, Hira Munir and Hammad Ismail

    Citation: Biomaterials Research 2021 25:17

    Content type: Research article

    Published on:

  23. The concept of periodontal regeneration has been revolutionised since the introduction of growth factors and bioactive bone substitutes which ensures optimal regeneration of the diseased periodontium. The aim ...

    Authors: Nivedha Venkatesan, Vamsi Lavu and S. K. Balaji

    Citation: Biomaterials Research 2021 25:15

    Content type: Research article

    Published on:

  24. Fabrication of three-dimensional stem cell spheroids have been studied to improve stem cell function, but the hypoxic core and limited penetration of nutrients and signaling cues to the interior of the spheroi...

    Authors: Jinkyu Lee, Sangmin Lee, Sung Min Kim and Heungsoo Shin

    Citation: Biomaterials Research 2021 25:14

    Content type: Research article

    Published on:

  25. Bioceramic β-tricalcium phosphate (β-TCP) is used as a bone-grafting material and a therapeutic drug carrier for treatment of bone defects in the oral and maxillofacial regions due to the osteoconductivity and...

    Authors: Dong Keon Lee, Mi-Ran Ki, Euy Hyun Kim, Chang-Joo Park, Jae Jun Ryu, Hyon Seok Jang, Seung Pil Pack, Yun Kee Jo and Sang Ho Jun

    Citation: Biomaterials Research 2021 25:13

    Content type: Research article

    Published on:

  26. The major interest in nanoparticles as an application platform for biotechnology arises from their high surface-to-volume ratio. Iron oxide nanoparticles (IONPs) are particularly appealing due to their superpa...

    Authors: Lucía Abarca-Cabrera, Paula Fraga-García and Sonja Berensmeier

    Citation: Biomaterials Research 2021 25:12

    Content type: Review

    Published on:

  27. Histology is considered as a gold standard for analyzing bone architecture. However, histomorphometry is a destructive method and only offers the bone information of a limited location. Micro-computed tomograp...

    Authors: Hao-Zhen Lyu and Jae Hyup Lee

    Citation: Biomaterials Research 2021 25:11

    Content type: Research article

    Published on:

  28. Extracellular matrix (ECM) has a profound effect on cell behaviors. In this study, we prepare a decellularized human nasal septal chondrocyte (NSC)-derived ECM (CHDM), as a natural (N-CHDM) or soluble form (S-...

    Authors: Yong Kwan Noh, Sung Won Kim, Ik-Hwan Kim and Kwideok Park

    Citation: Biomaterials Research 2021 25:10

    Content type: Research article

    Published on:

  29. The aim of the study is to characterize a biomedical magnesium alloy and highlighting the loss of mechanical integrity due to the sterilization method. Ideally, when using these alloys is to delay the onset of...

    Authors: Luis Humberto Campos Becerra, Marco Antonio Loudovic Hernández Rodríguez, Raúl Lesso Arroyo, Hugo Esquivel Solís and Alejandro Torres Castro

    Citation: Biomaterials Research 2021 25:9

    Content type: Research article

    Published on:

  30. In recent years, synthetic and semi-synthetic polymer materials have been widely used in various applications. Especially concerning biomedical applications, their biocompatibility, biodegradability, and non-t...

    Authors: Mallinath S. Birajdar, Haejin Joo, Won-Gun Koh and Hansoo Park

    Citation: Biomaterials Research 2021 25:8

    Content type: Review

    Published on:

  31. Understanding the regional vascular delivery of particles to tumour sites is a prerequisite for developing new diagnostic and therapeutic composites for treatment of oncology patients. We describe a novel imag...

    Authors: Ross W. Stephens, Gregory D. Tredwell, Jessica L. Bell, Karen J. Knox, Lee A. Philip, Tim J. Senden, Michael J. Tapner, Stephanie A. Bickley, Marcel R. Tanudji and Stephen K. Jones

    Citation: Biomaterials Research 2021 25:7

    Content type: Research article

    Published on:

  32. Biomineralized collagen, consisting of fibrillar type-I collagen with embedded hydroxyapatite mineral, is a bone-mimicking material with potential application as a bone graft substitute. Despite the chemical a...

    Authors: Daniel de Melo Pereira, Matthias Schumacher and Pamela Habibovic

    Citation: Biomaterials Research 2021 25:6

    Content type: Research article

    Published on:

  33. Titanium (Ti) has been utilized as hard tissue replacement owing to its superior mechanical and bioinert property, however, lack in tissue compatibility and biofunctionality has limited its clinical use. Reduc...

    Authors: Moon Sung Kang, Seung Jo Jeong, Seok Hyun Lee, Bongju Kim, Suck Won Hong, Jong Ho Lee and Dong-Wook Han

    Citation: Biomaterials Research 2021 25:4

    Content type: Research article

    Published on:

  34. It is known that a number of parameters can influence the post-printing properties of bone tissue scaffolds. Previous research has primarily focused on the effect of parameters associated with scaffold design ...

    Authors: Amanda Zimmerling, Zahra Yazdanpanah, David M. L. Cooper, James D. Johnston and Xiongbiao Chen

    Citation: Biomaterials Research 2021 25:3

    Content type: Research article

    Published on:

  35. The application of bioceramic hydroxyapatite (HA) derived from materials high in calcium to tissue engineering has been of concern, namely scaffold. Scaffold pores allow for cell mobility metabolic processes, ...

    Authors: Mona Sari, Puspa Hening, Chotimah, Ika Dewi Ana and Yusril Yusuf

    Citation: Biomaterials Research 2021 25:2

    Content type: Research article

    Published on:

  36. Bioactive glasses are traditionally associated with bonding to bone through a hydroxycarbonate apatite (HCA) surface layer but the release of active ions is more important for bone regeneration. They are now b...

    Authors: Anu K. Solanki, Ferdinand V. Lali, Hélène Autefage, Shweta Agarwal, Amy Nommeots-Nomm, Anthony D. Metcalfe, Molly M. Stevens and Julian R. Jones

    Citation: Biomaterials Research 2021 25:1

    Content type: Research article

    Published on:

  37. The aqueous solution behavior of thermosensitive PEG-PA block copolymers as well as secondary structure of PA is expected to significantly change through modification of the hydrophobic PA by long chain alkyl ...

    Authors: Min Hee Park, Jinkyung Park, Hyun Jung Lee and Byeongmoon Jeong

    Citation: Biomaterials Research 2020 24:23

    Content type: Research article

    Published on:

  38. Transdermal delivery is of great importance for the effective delivery of bioactive or therapeutic agents into a body. The microporation device based on radiofrequency can be used to enhance delivery efficienc...

    Authors: Guk Young Ahn, Hae-Seok Eo, Dongwon Kim and Sung-Wook Choi

    Citation: Biomaterials Research 2020 24:22

    Content type: Research article

    Published on:

  39. At present, the demand for orthodontic treatment is on the rise. On the other hand, evidence shows that the bond strength of composite resins to old composite restorations is often unreliable. Therefore, the a...

    Authors: Homa Farhadifard, Loghman Rezaei-Soufi, Maryam Farhadian and Parisa Shokouhi

    Citation: Biomaterials Research 2020 24:20

    Content type: Research article

    Published on:

  40. Collagen, the most abundant protein in the animal kingdom, represents a promising biomaterial for regenerative medicine applications due to its structural diversity and self-assembling complexity. Despite coll...

    Authors: Jeimmy González-Masís, Jorge M. Cubero-Sesin, Simón Guerrero, Sara González-Camacho, Yendry Regina Corrales-Ureña, Carlos Redondo-Gómez, José Roberto Vega-Baudrit and Rodolfo J. Gonzalez-Paz

    Citation: Biomaterials Research 2020 24:19

    Content type: Research article

    Published on:

  41. Conductive sheets of cellulose and carbon nanomaterials and its human skin applications are an interesting research aspect as they have potential for applications for skin compatibility. Hence it is needed to ...

    Authors: Karthik Paneer Selvam, Taichi Nagahata, Kosuke Kato, Mayuko Koreishi, Toshiyuki Nakamura, Yoshimasa Nakamura, Takeshi Nishikawa, Ayano Satoh and Yasuhiko Hayashi

    Citation: Biomaterials Research 2020 24:18

    Content type: Research article

    Published on:

  42. Biomaterial-based bone tissue engineering represents a promising solution to overcome reduced residual bone volume. It has been previously demonstrated that gradient and offset architectures of three-dimension...

    Authors: Naghmeh Abbasi, Ryan S. B. Lee, Saso Ivanovski, Robert M. Love and Stephen Hamlet

    Citation: Biomaterials Research 2020 24:17

    Content type: Research article

    Published on: