Skip to main content
Fig. 5 | Biomaterials Research

Fig. 5

From: Modulation of bioactive calcium phosphate micro/nanoparticle size and shape during in situ synthesis of photo-crosslinkable gelatin methacryloyl based nanocomposite hydrogels for 3D bioprinting and tissue engineering

Fig. 5

3D printing of (A) GelMA (40 layers printed, beyond that structure started distorting), (B) CNP (50%) GelMA (80 layers printed, beyond that structure started distorting), (C) CNP GelMA (160 layers printed, beyond that structure started distorting), (D) CNP + GelMA (90 layers printed, beyond that structure started distorting). 40% (w/v) sample solutions in DI water were used with 5% (w/w) Irgacure 2955 as a cross-linker, and UV light was continuously supplied on the printed structure during the printing process as shown in supplementary video

Back to article page

Biomaterials Research

ISSN: 2055-7124

Contact us