Skip to main content
Fig. 1 | Biomaterials Research

Fig. 1

From: Contact osteogenesis by biodegradable 3D-printed poly(lactide-co-trimethylene carbonate)

Fig. 1

Printability of the 3D-printed PCL and PLATMC, and their calculated printing-yield and density of the printed templates. a microscopic pictures to the printed structures, marked with dashed lines to track the strands in the top two layers, on which the strand width (diameter) and strand interdistance were measured to determine the printability of each polymer. b macroscopic pictures for the printed structures, scale bar in mm. c graph for the mean printing-yield (n = 4), and (d) box plots for the density of the printed templates (n = 25). The statistical significance between the groups is marked with Asterisks (*), **** p < 0.0001

Back to article page