Skip to main content
Fig. 1 | Biomaterials Research

Fig. 1

From: Hybrid membranes for the production of blood contacting surfaces: physicochemical, structural and biomechanical characterization

Fig. 1

The steps for obtaining the hybrid membrane. A) Porcine pericardial sample is placed into the metallic frame on the serosa side and fixed. B) The polymeric solution is gently poured over the fibrosa side of the pericardial sample. C) The polymeric membrane as it appears after drying. D) The hybrid membrane obtained by coupling porcine pericardium and Chronoflex AR

Back to article page

Biomaterials Research

ISSN: 2055-7124

Contact us