Skip to main content
Fig. 2 | Biomaterials Research

Fig. 2

From: Micro-CT – a digital 3D microstructural voyage into scaffolds: a systematic review of the reported methods and results

Fig. 2

Schematic illustration showing the basics of micro-CT. Cone-beam X-rays travel from the source to the detector through the sample with attenuation, and a gray-scale projection image is acquired at each rotation angle. Projection images are then reconstructed, and the reconstructed image dataset is used for analysis. The red dashed line indicates the vertical position of the reconstructed image, i.e., the cross-sectional image

Back to article page

Biomaterials Research

ISSN: 2055-7124

Contact us