TY - BOOK AU - Hull, C. W. PY - 1986 DA - 1986// TI - Apparatus for production of three-dimensional objects by stereolithography. US patent: 4,575,330 ID - Hull1986 ER - TY - JOUR AU - Kruth, J. P. AU - Leu, M. C. AU - Nakagawa, T. PY - 1998 DA - 1998// TI - Progress in additive manufacturing and rapid prototyping JO - CIRP Ann-Manuf Techn VL - 47 UR - https://doi.org/10.1016/S0007-8506(07)63240-5 DO - 10.1016/S0007-8506(07)63240-5 ID - Kruth1998 ER - TY - JOUR AU - Melchels, F. P. W. AU - Domingos, M. A. N. AU - Kleina, T. J. AU - Maldaa, J. AU - Bartoloc, P. J. AU - Hutmacher, D. W. PY - 2012 DA - 2012// TI - Additive manufacturing of tissues and organs JO - Prog Polym Sci VL - 37 UR - https://doi.org/10.1016/j.progpolymsci.2011.11.007 DO - 10.1016/j.progpolymsci.2011.11.007 ID - Melchels2012 ER - TY - JOUR AU - Bak, D. PY - 2003 DA - 2003// TI - Rapid prototyping or rapid production? 3D printing processes move industry towards the latter JO - Assembly Autom VL - 23 UR - https://doi.org/10.1108/01445150310501190 DO - 10.1108/01445150310501190 ID - Bak2003 ER - TY - JOUR AU - Campbell, T. A. AU - Ivanova, O. S. PY - 2013 DA - 2013// TI - 3D printing of multifunctional nanocomposites JO - Nano Today VL - 8 UR - https://doi.org/10.1016/j.nantod.2012.12.002 DO - 10.1016/j.nantod.2012.12.002 ID - Campbell2013 ER - TY - JOUR AU - Kulkarni, P. AU - Marsan, A. AU - Dutta, D. PY - 2000 DA - 2000// TI - A review of process planning techniques in layered manufacturing JO - Rapid Prototyping J VL - 6 UR - https://doi.org/10.1108/13552540010309859 DO - 10.1108/13552540010309859 ID - Kulkarni2000 ER - TY - JOUR AU - Rengier, F. AU - Mehndiratta, A. AU - Tengg-Kobligk, H. AU - Zechmann, C. M. AU - Unterhinninghofen, R. AU - Kauczor, H. U. AU - Giesel, F. L. PY - 2010 DA - 2010// TI - 3D printing based on imaging data: review of medical applications JO - Int J Comput Assist Radiol Surg VL - 5 UR - https://doi.org/10.1007/s11548-010-0476-x DO - 10.1007/s11548-010-0476-x ID - Rengier2010 ER - TY - STD TI - Bikas H, Stavropoulos P, Chryssolouris G. Additive manufacturing methods and modelling approaches: a critical review. Int J Adv Manuf Tech. 2015. DOI: 10.1007/s00170-015-7576-2. ID - ref8 ER - TY - JOUR AU - Wong, K. V. AU - Hernandez, A. PY - 2012 DA - 2012// TI - A review of additive manufacturing JO - ISRN Mech Eng. VL - 2012 UR - https://doi.org/10.5402/2012/208760 DO - 10.5402/2012/208760 ID - Wong2012 ER - TY - JOUR AU - Roberson, D. A. AU - Espalin, D. AU - Wicker, R. B. PY - 2013 DA - 2013// TI - 3D printer selection: a decision-making evaluation and ranking model JO - Virtual Phys Prototyp VL - 8 UR - https://doi.org/10.1080/17452759.2013.830939 DO - 10.1080/17452759.2013.830939 ID - Roberson2013 ER - TY - JOUR AU - Quan, Z. AU - Wu, A. AU - Keefe, M. AU - Qin, X. AU - Yu, J. AU - Suhr, J. AU - Byun, J. H. AU - Kim, B. S. AU - Chou, T. W. PY - 2015 DA - 2015// TI - Additive manufacturing of multidirectional preforms for composites: opportunities and challenges JO - Mater Today VL - 18 UR - https://doi.org/10.1016/j.mattod.2015.05.001 DO - 10.1016/j.mattod.2015.05.001 ID - Quan2015 ER - TY - JOUR AU - Dean, D. AU - Wallace, J. AU - Siblani, A. AU - Wang, M. O. AU - Kim, K. AU - Mikos, A. G. AU - Fisher, J. P. PY - 2012 DA - 2012// TI - Continuous digital light processing (cDLP): highly accurate additive manufacturing of tissue engineered bone scaffolds JO - Virtual Phys Prototyp VL - 7 UR - https://doi.org/10.1080/17452759.2012.673152 DO - 10.1080/17452759.2012.673152 ID - Dean2012 ER - TY - STD TI - Baumers M, Tuck C, Dickens P, Hague R. How can material jetting systems be upgraded for more efficient multi-material additive manufacturing? Proceedings of the Solid Freeform Fabrication (SFF) Symposium. Texas: The University of Texas at Austin; 2014. ID - ref13 ER - TY - JOUR AU - Gaytan, S. M. AU - Cadena, M. A. AU - Karim, H. AU - Delfin, D. AU - Lin, Y. AU - Espalin, D. AU - Macdonald, E. AU - Wicker, R. B. PY - 2015 DA - 2015// TI - Fabrication of barium titanate by binder jetting additive manufacturing technology JO - Ceram Int VL - 41 UR - https://doi.org/10.1016/j.ceramint.2015.01.108 DO - 10.1016/j.ceramint.2015.01.108 ID - Gaytan2015 ER - TY - STD TI - Xu X, Meteyer S, Perry N, Zhao YF. Energy consumption model of Binder-jetting additive manufacturing processes. Int J Prod Res. 2014; doi:10.1080/00207543.2014.937013. ID - ref15 ER - TY - JOUR AU - Turner, B. N. AU - Strong, R. AU - Gold, S. A. PY - 2014 DA - 2014// TI - A review of melt extrusion additive manufacturing processes: I. Process design and modeling JO - Rapid Prototyping J VL - 21 UR - https://doi.org/10.1108/RPJ-02-2013-0017 DO - 10.1108/RPJ-02-2013-0017 ID - Turner2014 ER - TY - JOUR AU - Domingos, M. AU - Chiellini, F. AU - Gloria, A. AU - Ambrosio, L. AU - Bartolo, P. AU - Chiellini, E. PY - 2012 DA - 2012// TI - Effect of process parameters on the morphological and mechanical properties of 3D bioextruded poly(ε‐caprolactone) scaffolds JO - Rapid Prototyping J VL - 18 UR - https://doi.org/10.1108/13552541211193502 DO - 10.1108/13552541211193502 ID - Domingos2012 ER - TY - JOUR AU - Land, W. S. AU - Zhang, B. AU - Ziegert, J. AU - Davies, A. PY - 2015 DA - 2015// TI - In-situ metrology system for laser powder bed fusion additive process JO - Procedia Manuf VL - 1 UR - https://doi.org/10.1016/j.promfg.2015.09.047 DO - 10.1016/j.promfg.2015.09.047 ID - Land2015 ER - TY - JOUR AU - Su, X. AU - Yang, Y. AU - Xiao, D. AU - Chen, Y. PY - 2013 DA - 2013// TI - Processability investigatation of non-assembly mechanisms for powder bed fusion process JO - Int J Adv Manuf Technol VL - 64 UR - https://doi.org/10.1007/s00170-012-4079-2 DO - 10.1007/s00170-012-4079-2 ID - Su2013 ER - TY - JOUR AU - Ahn, D. AU - Kweon, J. H. AU - Chio, J. AU - Lee, S. PY - 2012 DA - 2012// TI - Quantification of surface roughness of parts processed by laminated object manufacturing JO - J Mater Process Technol VL - 212 UR - https://doi.org/10.1016/j.jmatprotec.2011.08.013 DO - 10.1016/j.jmatprotec.2011.08.013 ID - Ahn2012 ER - TY - JOUR AU - Park, J. AU - Tari, M. J. AU - Hahn, T. PY - 2000 DA - 2000// TI - Characterization of the laminated object manufacturing (LOM) process JO - Rapid Prototyping J VL - 6 UR - https://doi.org/10.1108/13552540010309868 DO - 10.1108/13552540010309868 ID - Park2000 ER - TY - JOUR AU - Zhang, K. AU - Liu, W. AU - Shang, X. PY - 2007 DA - 2007// TI - Research on the processing experiments of laser metal deposition shaping JO - Opt Laser Technol VL - 39 UR - https://doi.org/10.1016/j.optlastec.2005.10.009 DO - 10.1016/j.optlastec.2005.10.009 ID - Zhang2007 ER - TY - JOUR AU - Lewis, G. K. AU - Schlienger, E. PY - 2000 DA - 2000// TI - Practical considerations and capabilities for laser assisted direct metal deposition JO - Mater Design VL - 21 UR - https://doi.org/10.1016/S0261-3069(99)00078-3 DO - 10.1016/S0261-3069(99)00078-3 ID - Lewis2000 ER - TY - JOUR AU - Dhandayuthapani, B. AU - Yoshida, Y. AU - Maekawa, T. AU - Kumar, D. S. PY - 2011 DA - 2011// TI - Polymeric scaffolds in tissue engineering application: review JO - Int J Polym Sci. VL - 2011 UR - https://doi.org/10.1155/2011/290602 DO - 10.1155/2011/290602 ID - Dhandayuthapani2011 ER - TY - JOUR AU - Atala, A. PY - 2012 DA - 2012// TI - Tissue engineering of reproductive tissues and organs JO - Fertil Steril VL - 98 UR - https://doi.org/10.1016/j.fertnstert.2012.05.038 DO - 10.1016/j.fertnstert.2012.05.038 ID - Atala2012 ER - TY - JOUR AU - Forbes, S. J. AU - Rosenthal, N. PY - 2014 DA - 2014// TI - Preparing the ground for tissue regeneration: from mechanism to therapy JO - Nat Med VL - 20 UR - https://doi.org/10.1038/nm.3653 DO - 10.1038/nm.3653 ID - Forbes2014 ER - TY - JOUR AU - Tian, H. AU - Tang, Z. AU - Zhuang, X. AU - Chen, X. AU - Jing, X. PY - 2012 DA - 2012// TI - Biodegradable synthetic polymers: preparation, functionalization and biomedical application JO - Prog Polym Sci VL - 37 UR - https://doi.org/10.1016/j.progpolymsci.2011.06.004 DO - 10.1016/j.progpolymsci.2011.06.004 ID - Tian2012 ER - TY - JOUR AU - O’Brien, F. J. PY - 2011 DA - 2011// TI - Biomaterials and scaffolds for tissue engineering JO - Materials Today VL - 14 UR - https://doi.org/10.1016/S1369-7021(11)70058-X DO - 10.1016/S1369-7021(11)70058-X ID - O’Brien2011 ER - TY - JOUR AU - Bose, S. AU - Vahabzadeh, S. AU - Bandyopadhyay, A. PY - 2013 DA - 2013// TI - Bone tissue engineering using 3D printing JO - Materials Today VL - 16 UR - https://doi.org/10.1016/j.mattod.2013.11.017 DO - 10.1016/j.mattod.2013.11.017 ID - Bose2013 ER - TY - JOUR AU - Gauvin, R. AU - Chen, Y. C. AU - Lee, J. W. AU - Soman, P. AU - Zorlutuna, P. AU - Nichol, J. W. AU - Bae, H. AU - Chen, S. AU - Khademhosseini, A. PY - 2012 DA - 2012// TI - Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography JO - Biomaterials VL - 33 UR - https://doi.org/10.1016/j.biomaterials.2012.01.048 DO - 10.1016/j.biomaterials.2012.01.048 ID - Gauvin2012 ER - TY - JOUR AU - Martin, J. R. AU - Gupta, M. K. AU - Page, J. M. AU - Yu, F. AU - Davidson, J. M. AU - Guelcher, S. A. AU - Duvall, C. L. PY - 2014 DA - 2014// TI - A porous tissue engineering scaffold selectively degraded by cell-generated reactive oxygen species JO - Biomaterials VL - 35 UR - https://doi.org/10.1016/j.biomaterials.2014.01.026 DO - 10.1016/j.biomaterials.2014.01.026 ID - Martin2014 ER - TY - JOUR AU - Bose, S. AU - Roy, M. AU - Bandyopadhyay, A. PY - 2012 DA - 2012// TI - Recent advances in bone tissue engineering scaffolds JO - Trends Biotechnol VL - 30 UR - https://doi.org/10.1016/j.tibtech.2012.07.005 DO - 10.1016/j.tibtech.2012.07.005 ID - Bose2012 ER - TY - JOUR AU - Billiet, T. AU - Vandenhaute, M. AU - Schelfhout, J. AU - Vlierberghe, S. V. AU - Dubruel, P. PY - 2012 DA - 2012// TI - A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering JO - Biomaterials VL - 33 UR - https://doi.org/10.1016/j.biomaterials.2012.04.050 DO - 10.1016/j.biomaterials.2012.04.050 ID - Billiet2012 ER - TY - JOUR AU - Mačiulaitis, J. AU - Deveikytė, M. AU - Rekštytė, S. AU - Bratchikov, M. AU - Darinskas, A. AU - Šimbelytė, A. AU - Daunoras, G. AU - Laurinavičienė, A. AU - Laurinavičius, A. AU - Gudas, R. AU - Malinauskas, M. AU - Mačiulaitis, R. PY - 2015 DA - 2015// TI - Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography JO - Biofabrication VL - 7 UR - https://doi.org/10.1088/1758-5090/7/1/015015 DO - 10.1088/1758-5090/7/1/015015 ID - Mačiulaitis2015 ER - TY - JOUR AU - Lee, J. W. AU - Ahn, G. S. AU - Kim, D. S. AU - Cho, D. W. PY - 2009 DA - 2009// TI - Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography JO - Microelectron Eng VL - 86 UR - https://doi.org/10.1016/j.mee.2008.12.038 DO - 10.1016/j.mee.2008.12.038 ID - Lee2009 ER - TY - JOUR AU - Patrício, T. AU - Domingos, M. AU - Gloria, A. AU - D’Amora, U. AU - Coelho, J. F. AU - Bártolo, P. J. PY - 2014 DA - 2014// TI - Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering JO - Rapid Prototyping J VL - 20 UR - https://doi.org/10.1108/RPJ-04-2012-0037 DO - 10.1108/RPJ-04-2012-0037 ID - Patrício2014 ER - TY - JOUR AU - Zein, I. AU - Hutmacher, D. W. AU - Tan, K. C. AU - Teoh, S. H. PY - 2002 DA - 2002// TI - Fused deposition modeling of novel scaffold architectures for tissue engineering applications JO - Biomaterials VL - 23 UR - https://doi.org/10.1016/S0142-9612(01)00232-0 DO - 10.1016/S0142-9612(01)00232-0 ID - Zein2002 ER - TY - JOUR AU - Velu, R. AU - Singamneni, S. PY - 2014 DA - 2014// TI - Selective laser sintering of polymer biocomposites based on polymethyl methacrylate JO - J Mater Res VL - 29 UR - https://doi.org/10.1557/jmr.2014.211 DO - 10.1557/jmr.2014.211 ID - Velu2014 ER - TY - JOUR AU - Mazzoli, A. AU - Ferretti, C. AU - Gigante, A. AU - Salvolini, E. AU - Mattioli-Belmonte, M. PY - 2015 DA - 2015// TI - Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering JO - Rapid Prototyping J VL - 21 UR - https://doi.org/10.1108/RPJ-04-2013-0040 DO - 10.1108/RPJ-04-2013-0040 ID - Mazzoli2015 ER - TY - JOUR AU - Hsieh, F. Y. AU - Lin, H. H. AU - Hsu, S. H. PY - 2015 DA - 2015// TI - 3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair JO - Biomaterials VL - 71 UR - https://doi.org/10.1016/j.biomaterials.2015.08.028 DO - 10.1016/j.biomaterials.2015.08.028 ID - Hsieh2015 ER - TY - JOUR AU - Ahn, S. H. AU - Lee, H. J. AU - Lee, J. S. AU - Yoon, H. AU - Chun, W. AU - Kim, G. H. PY - 2015 DA - 2015// TI - A novel cell-printing method and its application to hepatogenic differentiation of human adipose stem cell-embedded mesh structures JO - Sci Rep VL - 5 UR - https://doi.org/10.1038/srep13427 DO - 10.1038/srep13427 ID - Ahn2015 ER - TY - JOUR AU - Murphy, S. V. AU - Atala, A. PY - 2014 DA - 2014// TI - 3D bioprinting of tissues and organs JO - Nat Biotechnol VL - 32 UR - https://doi.org/10.1038/nbt.2958 DO - 10.1038/nbt.2958 ID - Murphy2014 ER - TY - JOUR AU - Wu, G. H. AU - Hsu, S. H. PY - 2015 DA - 2015// TI - Review: polymeric-based 3D printing for tissue engineering JO - J Med Biol Eng VL - 35 UR - https://doi.org/10.1007/s40846-015-0038-3 DO - 10.1007/s40846-015-0038-3 ID - Wu2015 ER - TY - JOUR AU - Neiman, J. A. S. AU - Raman, R. AU - Chan, V. AU - Rhoads, M. G. AU - Raredon, M. S. B. AU - Velazquez, J. J. AU - Dyer, R. L. AU - Bashir, R. AU - Hammond, P. T. AU - Griffith, L. G. PY - 2015 DA - 2015// TI - Photopatterning of hydrogel scaffolds coupled to filter materials using stereolithography for perfused 3D culture of hepatocytes JO - Biotechnol Bioeng VL - 112 UR - https://doi.org/10.1002/bit.25494 DO - 10.1002/bit.25494 ID - Neiman2015 ER - TY - JOUR AU - Elomaa, L. AU - Pan, C. C. AU - Shanjani, Y. AU - Malkovskiy, A. AU - Seppälä, J. V. AU - Yang, Y. PY - 2015 DA - 2015// TI - Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography JO - J Mater Chem B VL - 3 UR - https://doi.org/10.1039/C5TB01468A DO - 10.1039/C5TB01468A ID - Elomaa2015 ER - TY - JOUR AU - Elomaa, L. AU - Teixeira, S. AU - Hakala, S. AU - Korhonen, H. AU - Grijpma, D. W. AU - Seppälä, J. V. PY - 2011 DA - 2011// TI - Preparation of poly(e-caprolactone)-based tissue engineering scaffolds by stereolithography JO - Acta Biomater VL - 7 UR - https://doi.org/10.1016/j.actbio.2011.06.039 DO - 10.1016/j.actbio.2011.06.039 ID - Elomaa2011 ER - TY - JOUR AU - Chan, V. AU - Zorlutuna, P. AU - Jeong, J. H. AU - Kong, H. AU - Bashir, R. PY - 2010 DA - 2010// TI - Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation JO - Lab Chip VL - 10 UR - https://doi.org/10.1039/c004285d DO - 10.1039/c004285d ID - Chan2010 ER - TY - JOUR AU - Seck, T. M. AU - Melchels, F. P. W. AU - Feijen, J. AU - Grijpma, D. W. PY - 2010 DA - 2010// TI - Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D, L-lactide)-based resins JO - J Control Release VL - 148 UR - https://doi.org/10.1016/j.jconrel.2010.07.111 DO - 10.1016/j.jconrel.2010.07.111 ID - Seck2010 ER - TY - JOUR AU - Pati, F. AU - Song, T. H. AU - Rijal, G. AU - Jang, J. AU - Kim, S. W. AU - Cho, D. W. PY - 2015 DA - 2015// TI - Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration JO - Biomaterials VL - 37 UR - https://doi.org/10.1016/j.biomaterials.2014.10.012 DO - 10.1016/j.biomaterials.2014.10.012 ID - Pati2015 ER - TY - JOUR AU - Lee, K. H. AU - Jin, G. H. AU - Jang, C. H. AU - Jung, W. K. AU - Kim, G. H. PY - 2013 DA - 2013// TI - Preparation and characterization of multi-layered poly(ɛ-caprolactone)/chitosan scaffolds fabricated with a combination of melt-plotting/in situ plasma treatment and a coating method for hard tissue regeneration JO - J Mater Chem B VL - 1 UR - https://doi.org/10.1039/c3tb21123a DO - 10.1039/c3tb21123a ID - Lee2013 ER - TY - JOUR AU - Hong, J. M. AU - Kim, B. J. AU - Shim, J. H. AU - Kang, K. S. AU - Kim, K. J. AU - Rhie, J. W. AU - Cha, H. J. AU - Cho, D. W. PY - 2012 DA - 2012// TI - Enhancement of bone regeneration through facile surface functionalization of solid freeform fabrication-based three-dimensional scaffolds using mussel adhesive proteins JO - Acta Biomater VL - 8 UR - https://doi.org/10.1016/j.actbio.2012.03.041 DO - 10.1016/j.actbio.2012.03.041 ID - Hong2012 ER - TY - JOUR AU - Berry, E. AU - Brown, J. M. AU - Connell, M. AU - Craven, C. M. AU - Efford, N. D. AU - Radjenovic, A. AU - Smith, M. A. PY - 1997 DA - 1997// TI - Preliminary experience with medical applications of rapid prototyping by selective laser sintering JO - Med Eng Phys VL - 19 UR - https://doi.org/10.1016/S1350-4533(96)00039-2 DO - 10.1016/S1350-4533(96)00039-2 ID - Berry1997 ER - TY - JOUR AU - Rimell, J. T. AU - Marquis, P. M. PY - 2000 DA - 2000// TI - Selective laser sintering of ultra high molecular weight polyethylene for clinical applications JO - J Biomed Mater Res VL - 53 UR - https://doi.org/3.0.CO;2-M DO - 3.0.CO;2-M ID - Rimell2000 ER - TY - JOUR AU - Shishkovsky, I. V. AU - Tarasova, E. Y. AU - Zhuravel, L. V. AU - Petrov, A. L. PY - 2001 DA - 2001// TI - The synthesis of a biocomposite based on nickel titanium and hydroxyapatite under selective laser sintering conditions JO - Tech Phys Lett VL - 27 UR - https://doi.org/10.1134/1.1359830 DO - 10.1134/1.1359830 ID - Shishkovsky2001 ER - TY - JOUR AU - Tan, K. H. AU - Chua, C. K. AU - Leong, K. F. AU - Cheah, C. M. AU - Cheang, P. AU - Abu Bakar, M. S. AU - Cha, S. W. PY - 2003 DA - 2003// TI - Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends JO - Biomaterials VL - 24 UR - https://doi.org/10.1016/S0142-9612(03)00131-5 DO - 10.1016/S0142-9612(03)00131-5 ID - Tan2003 ER - TY - JOUR AU - Wiria, F. E. AU - Leong, K. F. AU - Chua, C. K. AU - Liu, Y. PY - 2007 DA - 2007// TI - Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering JO - Acta Biomater VL - 3 UR - https://doi.org/10.1016/j.actbio.2006.07.008 DO - 10.1016/j.actbio.2006.07.008 ID - Wiria2007 ER - TY - JOUR AU - Zhang, H. AU - Lin, C. Y. AU - Hollister, S. J. PY - 2009 DA - 2009// TI - The interaction between bone marrow stromal cells and RGD-modified three-dimensional porous polycaprolactone scaffolds JO - Biomaterials VL - 30 UR - https://doi.org/10.1016/j.biomaterials.2009.04.015 DO - 10.1016/j.biomaterials.2009.04.015 ID - Zhang2009 ER - TY - JOUR AU - Kanczler, J. M. AU - Mirmalek-Sani, S. H. AU - Hanley, N. A. AU - Ivanov, A. L. AU - Barry, J. J. A. AU - Upton, C. AU - Shakesheff, K. M. AU - Howdle, S. M. AU - Antonov, E. N. AU - Bagratashvili, V. N. AU - Popov, V. K. AU - Oreffo, R. O. C. PY - 2009 DA - 2009// TI - Biocompatibility and osteogenic potential of human fetal femur-derived cells on surface selective laser sintered scaffolds JO - Acta Biomater VL - 5 UR - https://doi.org/10.1016/j.actbio.2009.03.010 DO - 10.1016/j.actbio.2009.03.010 ID - Kanczler2009 ER - TY - JOUR AU - Du, Y. AU - Liu, H. AU - Shuang, J. AU - Wang, J. AU - Ma, J. AU - Zhang, S. PY - 2015 DA - 2015// TI - Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility JO - Colloids Surf B Biointerfaces VL - 135 UR - https://doi.org/10.1016/j.colsurfb.2015.06.074 DO - 10.1016/j.colsurfb.2015.06.074 ID - Du2015 ER - TY - JOUR AU - Williams, J. M. AU - Adewunmi, A. AU - Schek, R. M. AU - Flanagan, C. L. AU - Krebsbach, P. H. AU - Feinberg, S. E. AU - Hollister, S. J. AU - DAS, S. PY - 2005 DA - 2005// TI - Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2004.11.057 DO - 10.1016/j.biomaterials.2004.11.057 ID - Williams2005 ER - TY - JOUR AU - Chen, C. H. AU - Lee, M. Y. AU - Shyu, V. B. H. AU - Chen, Y. C. AU - Chen, C. T. AU - Chen, J. P. PY - 2014 DA - 2014// TI - Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering JO - Mater Sci Eng C VL - 40 UR - https://doi.org/10.1016/j.msec.2014.04.029 DO - 10.1016/j.msec.2014.04.029 ID - Chen2014 ER - TY - JOUR AU - Ciocca, L. AU - Fantini, M. AU - Crescenzio, F. AU - Corinaldesi, G. AU - Scotti, R. PY - 2011 DA - 2011// TI - Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches JO - Med Biol Eng Comput VL - 49 UR - https://doi.org/10.1007/s11517-011-0813-4 DO - 10.1007/s11517-011-0813-4 ID - Ciocca2011 ER - TY - JOUR AU - Sanjana, N. E. AU - Fuller, S. B. PY - 2004 DA - 2004// TI - A fast flexible ink-jet printing method for patterning dissociated neurons in culture JO - J Neurosci Methods VL - 136 UR - https://doi.org/10.1016/j.jneumeth.2004.01.011 DO - 10.1016/j.jneumeth.2004.01.011 ID - Sanjana2004 ER - TY - JOUR AU - Xu, T. AU - Gregory, C. A. AU - Molnar, P. AU - Cui, X. AU - Jalota, S. AU - Bhaduri, S. B. AU - Boland, T. PY - 2006 DA - 2006// TI - Viability and electrophysiology of neural cell structures generated by the inkjet printing method JO - Biomaterials VL - 27 ID - Xu2006 ER - TY - JOUR AU - Lee, Y. B. AU - Polio, S. AU - Lee, W. AU - Dai, G. AU - Menon, L. AU - Carroll, R. S. AU - Yoo, S. S. PY - 2010 DA - 2010// TI - Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture JO - Exp Neurol VL - 223 UR - https://doi.org/10.1016/j.expneurol.2010.02.014 DO - 10.1016/j.expneurol.2010.02.014 ID - Lee2010 ER - TY - JOUR AU - Lorber, B. AU - Hsiao, W. K. AU - Hutchings, I. M. AU - Martin, K. R. PY - 2014 DA - 2014// TI - Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/1/015001 DO - 10.1088/1758-5082/6/1/015001 ID - Lorber2014 ER - TY - JOUR AU - Pati, F. AU - Ha, D. H. AU - Jang, J. AU - Han, H. H. AU - Rhie, J. W. AU - Cho, D. W. PY - 2015 DA - 2015// TI - Biomimetic 3D tissue printing for soft tissue regeneration JO - Biomaterials VL - 62 UR - https://doi.org/10.1016/j.biomaterials.2015.05.043 DO - 10.1016/j.biomaterials.2015.05.043 ID - Pati2015 ER - TY - JOUR AU - Irvine, S. A. AU - Agrawal, A. AU - Lee, B. H. AU - Chua, H. Y. AU - Low, K. Y. AU - Lau, B. C. AU - Machluf, M. AU - Venkatraman, S. PY - 2015 DA - 2015// TI - Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking JO - Biomed Microdevices VL - 17 UR - https://doi.org/10.1007/s10544-014-9915-8 DO - 10.1007/s10544-014-9915-8 ID - Irvine2015 ER - TY - JOUR AU - Vaidya, M. PY - 2015 DA - 2015// TI - Startups tout commercially 3D-printed tissue for drug screening JO - Nat Med VL - 21 UR - https://doi.org/10.1038/nm0115-2 DO - 10.1038/nm0115-2 ID - Vaidya2015 ER - TY - JOUR AU - Reiffel, A. J. AU - Kafka, C. AU - Hernandez, K. A. AU - Popa, S. AU - Perez, J. L. AU - Zhou, S. AU - Pramanik, S. AU - Brown, B. N. AU - Ryu, W. S. AU - Bonassar, L. J. AU - Spector, J. A. PY - 2013 DA - 2013// TI - High-fidelity tissue engineering of patient-specific auricles for reconstruction of pediatric microtia and other auricular deformities JO - PLoS One VL - 8 UR - https://doi.org/10.1371/journal.pone.0056506 DO - 10.1371/journal.pone.0056506 ID - Reiffel2013 ER - TY - JOUR AU - Rimann, M. AU - Laternser, S. AU - Keller, H. AU - Leupin, O. AU - Graf-Hausner, U. PY - 2015 DA - 2015// TI - 3D bioprinted muscle and tendon tissues for drug development JO - CHIMIA VL - 69 UR - https://doi.org/10.2533/chimia.2015.65 DO - 10.2533/chimia.2015.65 ID - Rimann2015 ER - TY - JOUR AU - Hockaday, L. PY - 2015 DA - 2015// TI - 3D bioprinting: a deliberate business JO - Genet Eng Biotechn N VL - 35 UR - https://doi.org/10.1089/gen.35.01.09 DO - 10.1089/gen.35.01.09 ID - Hockaday2015 ER - TY - JOUR AU - Gittard, S. D. AU - Chen, B. AU - Xu, H. AU - Ovsianikov, A. AU - Chichkov, B. N. AU - Monteiro-Riviere, N. A. AU - Narayan, R. J. PY - 2013 DA - 2013// TI - The effects of geometry on skin penetration and failure of polymer microneedles JO - J Adhes Sci Technol VL - 27 UR - https://doi.org/10.1080/01694243.2012.705101 DO - 10.1080/01694243.2012.705101 ID - Gittard2013 ER - TY - JOUR AU - Bilgin, M. S. AU - Erdem, A. AU - Aglarci, O. S. AU - Dilber, E. PY - 2015 DA - 2015// TI - Fabricating complete dentures with CAD/CAM and RP technologies JO - J Prosthodont VL - 24 UR - https://doi.org/10.1111/jopr.12302 DO - 10.1111/jopr.12302 ID - Bilgin2015 ER -