Skip to main content
Download PDF

Correction: Challenges and advances in materials and fabrication technologies of small-diameter vascular grafts

Biomaterials Research volume 27, Article number: 91 (2023) Cite this article

The Original Article was published on 08 June 2023

Biomaterials Research (2023) 27:58

https://doi.org/10.1186/s40824-023-00399-2

The original article [1] mistakenly affiliated several authors who have since been re-affiliated to their correct institutions.

Author information

Author notes

  1. Mei-Xian Li and Qian-Qi Wei contributed equally to this work.

Authors and Affiliations

  1. National and Local Joint Engineering Research Center of Technical Fiber Composites for Safety and Protection, Nantong University, 226019, Nantong, China

    Mei-Xian Li, Yu Ren & Wei Zhang

  2. School of Textile and Clothing, Nantong University, 226019, Nantong, China

    Mei-Xian Li, Hui-Lin Mo, Yu Ren & Wei Zhang

  3. Center for Biomaterials, Biomedical Research Institute, Korea Institute of Science and Technology, 02792, Seoul, Republic of Korea

    Mei-Xian Li & Yoon Ki Joung

  4. Department of Infectious Diseases, General Hospital of Tibet Military Command, Xizang, China

    Qian-Qi Wei

  5. Institute of Special Environmental Medicine, Nantong University, 226019, Nantong, China

    Huan-Jun Lu

  6. Division of Bio-Medical Science and Technology, University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, 34113, Daejeon, Republic of Korea

    Yoon Ki Joung

Authors
  1. Mei-Xian Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Qian-Qi Wei
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Hui-Lin Mo
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yu Ren
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Wei Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Huan-Jun Lu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Yoon Ki Joung
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Wei Zhang, Huan-Jun Lu or Yoon Ki Joung.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The online version of the original article can be found at https://doi.org/10.1186/s40824-023-00399-2

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, MX., Wei, QQ., Mo, HL. et al. Correction: Challenges and advances in materials and fabrication technologies of small-diameter vascular grafts. Biomater Res 27, 91 (2023). https://doi.org/10.1186/s40824-023-00424-4

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/s40824-023-00424-4

Biomaterials Research

ISSN: 2055-7124

Contact us